TPS40200HD

TPS40200HD Overview

With a 8-SOIC (0.154, 3.90mm Width) package, the switching controller is suitable for a wide range of applications. For outputs of 1, this dc motor controller is suitable. The pmic is packaged in Tube solid enclosure. The program can handle Transistor Driver dc switching's outputs (s). A 5.5V~52V voltage is supplied to the dc control and used for operating it. Worked in an dc switcher with a -55°C~175°C TA rating. This switching controller can switch at 35kHz~500kHz. Surface Mount makes it suitable for general dc dc regulator. Featured in the dcdc regulator is Frequency Control, Soft Start which allows efficient switching control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. The switching converters's terminals (s) are designed at DUAL. 8 terminations with various dc switching's functions. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. TPS40195 can be searched for other relevant dc to dc converter ics. The switching converter has a total of 8 pins. A 45.24V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 2.5A, which should be noted down when you start a project. The duty cycle of the voltage regulator dc to dc can be set to 98 % on power-up or power-down to ensure reliability. 500kHz is the maximum frequency of this dc regulators. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 45.24V so that DC to DC voltage regulator better serves the purpose. In dormant mode, 1.5mA is used. Users must limit the voltage accordingly because the dc switcher's maximum input voltage is 52V. 4.5V is the required supply voltage. An output current greater than 3A cannot be provided by the dc switcher. The switching converter can output 46V volts at its utmost, according to the datasheet. It runs on a 1.5A supply current. Lowest voltage output of the voltage controller must be greater than 700mV.

TPS40200HD Features

Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
Max Duty Cycle: 98 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7V TO 45.24V

TPS40200HD Applications

There are a lot of Texas Instruments TPS40200HD DC to DC converter applications.

• Magnetohydrodynamic power
• Computer application technology
• Electrical power transmission
• Industrial controllers
• CMM
• Motor controller circuits
• Fire elevators
• USB circuits
• Imported equipment
• Energy management systems