SN74LV74AQDRQ1

SN74LV74AQDRQ1 Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. Package Tape & Reel (TR)embeds it. The output it is configured with uses Differential. The trigger it is configured with uses Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~125°C TAis considered to be the operating temperature. It belongs to the type D-Typeof flip flops. FPGAs belonging to the Automotive, AEC-Q100, 74LVseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 140MHz. As a result, it consumes 20μA quiescent current and is not affected by external forces. 14terminations have occurred. D latch belongs to the 74LV74 family. A voltage of 2.5V is used as the power supply for this D latch. There is 2pF input capacitance for this T flip flop. Devices in the LV/LV-A/LVX/Hfamily are electronic devices. It is mounted by the way of Surface Mount. The 14pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. The supply voltage (Vsup) should be kept above 2V for normal operation. Its flexibility is enhanced by 2 circuits. Due to its reliability, this T flip flop is well suited for TR. The system runs on a power supply of 3.3V watts. As a result of its output current of 12mA, it is very flexible in terms of design.

SN74LV74AQDRQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LV series
14 pins
3.3V power supplies

SN74LV74AQDRQ1 Applications

There are a lot of Texas Instruments SN74LV74AQDRQ1 Flip Flops applications.

• Latch-up performance
• Data transfer
• Balanced 24 mA output drivers
• Storage registers
• Data Synchronizers
• Bus hold
• Computing
• Load Control
• Functionally equivalent to the MC10/100EL29
• Registers