MM74HCT273MTC

MM74HCT273MTC Overview

20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. It is included in the package Tube. Currently, the output is configured to use Non-Inverted. It is configured with the trigger Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. This D latch has the type D-Type. The FPGA belongs to the 74HCT series. A frequency of 68MHzshould be the maximum output frequency. In total, there are 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. Terminations are 20. The 74HCT273 family contains this object. A voltage of 5V provides power to the D latch. This T flip flop has a capacitance of 6pF farads at the input. A device of this type belongs to the family of HCT. It is mounted by the way of Surface Mount. This board is designed with 20pins on it. This device has Positive Edgeas its clock edge trigger type. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 8bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. The D latch runs on a voltage of 5V volts. If high efficiency is desired, the supply voltage should be kept at 5V.

MM74HCT273MTC Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT273MTC Applications

There are a lot of ON Semiconductor MM74HCT273MTC Flip Flops applications.

• Single Up Count-Control Line
• Data transfer
• Latch
• Instrumentation
• Clock pulse
• CMOS Process
• Frequency Dividers
• ESD protection
• Storage registers
• Automotive