CD74HC174M96G4

CD74HC174M96G4 Overview

The item is packaged in SOICcases. There are 1 elements in it. In 16terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. An input voltage of 4.5Vpowers the D latch. It belongs to the family of electronic devices known as HC/UH. Electronic part Surface Mountis mounted in the way. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. The part you are looking for is included in FF/Latches. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. As a result, it consumes 8μA of quiescent current without being affected by external factors. Furthermore, it has DUMMY VALas a characteristic. High level output current is set to -5.2mA. A 5.2mAvalue is set for low-level output current. A temperature below 125°Cis recommended for operation. Ideally, the operating temperature should be higher than -55°C. Initially, it requires a voltage of 2V as the minimum supply voltage. There is a maximum supply voltage of 6V. It is possible to achieve a frequency of 35MHz. The logic IC it uses is D FLIP-FLOP. There are 1 functions available on the JK flip flop. There are 16 pins on the D latch. As a result of its output current of 5.2mA, it is very flexible in terms of design.

CD74HC174M96G4 Features

16 pins
1 Functions
16 pin count

CD74HC174M96G4 Applications

There are a lot of Texas Instruments CD74HC174M96G4 Flip Flops applications.

• Functionally equivalent to the MC10/100EL29
• Patented noise
• Instrumentation
• Bus hold
• Computing
• High Performance Logic for test systems
• Latch
• CMOS Process
• ATE
• Differential Individual