ATF750C-10NM/883

ATF750C-10NM/883 Overview

There are 10 macro cells, which provide radio coverage via high-power cell towers, antennas or masts in a mobile phone network.It is contained in package [0].There are 10 I/Os on the board.The device is programmed with 28 terminations.The terminal position of this electrical component is QUAD.A voltage of 5V is used as the power supply for this device.There is a part in the family [0].As a result, it is packaged as Tube.Due to its reliability, it is operated at a temperature of [0].The chip should be mounted by Surface Mount.In FPGA terms, it is a type of ATF750C(L)series FPGA.The device can also be used to find [0].In accordance with the [0], its related parts are listed.A digital circuit can be constructed using 750gates.If high efficiency is desired, the supply voltage should be kept at [0].It is recommended that data be stored in [0].The electronic component is mounted by Surface Mount.It is designed with 28 pins.This device operates at a voltage of 5.5Vas its maximum supply voltage.With a minimal supply voltage of [0], it operates.It runs on a voltage of 5Vvolts.In this case, 90MHzis the frequency that can be achieved.The status of input signals is detected by 11dedicated inputs.

ATF750C-10NM/883 Features

28-CLCC package
10 I/Os
The operating temperature of -55°C~125°C TA
28 pins
5V power supplies

ATF750C-10NM/883 Applications

There are a lot of Microchip Technology ATF750C-10NM/883 CPLDs applications.

• Battery operated portable devices
• LED Lighting systems
• D/T registers and latches
• Network Interface Card (NIC) and Host Bus Adapter (HBA)
• Software-driven hardware configuration
• TIMERS/COUNTERS
• Preset swapping
• Power up sequencing
• Software-Driven Hardware Configuration
• POWER-SAVING MODES